Infinite Technologies RCS, Inc.

Engineering services covering antenna-specific radome sizing, structural configuration, panel geometry, and joint design for ground-based and maritime composite radome systems.

• Electromagnetic & RF Performance Analysis

  Transmission loss prediction, impedance-matched joint tuning, sidelobe analysis, and phase performance evaluation across L-, S-, C-, and X-Band frequencies for radar, SATCOM, ATC, weather radar, and TT&C antenna systems.

• Mechanical & Environmental Analysis

  Finite Element analysis confirming structural integrity against wind loads (standard 155 mph), balanced and unbalanced snow and ice loads, gust effect factors, topographic conditions, and site-specific environmental variables per recognized engineering standards.

• Radome Sizing & Configuration

  Diameter and truncation selection for prime-focus, Cassegrain and Gregorian, offset-feed, and phased-array antenna systems; truncations from less than 60% to approximately 90%; multi-antenna and fixed-position configurations supported.

Production of A-sandwich, C-sandwich, and solid laminate composite radome panels in standard and custom sizes, featuring pseudo-randomized panel geometry, UV-stabilized hydrophobic exterior coatings, and stainless-steel bolted lap-joint assembly systems designed for a 20-year service life.

• Ground-Based Radomes

  Segmented spherical and custom-geometry composite radomes from 3.1 m (10 ft) to 30 m (98 ft) for SATCOM, Air Traffic Management, weather radar, Telemetry Tracking and Command, 2D and 3D military surveillance, and fire control antenna systems.

• Maritime Radomes

  Compact composite radome systems from 1.4 m (4.5 ft) to 2.5 m (8.2 ft) for ship-mounted fixed-site and mobile SATCOM antenna platforms.

• Tactical & Mobile Radomes

  Rapidly deployable segmented and single-piece radome units from 7.2 ft (2.2 m) to 14 ft (4.3 m), designed for robust erection in demanding field environments including expeditionary and mobile satellite communications missions.

Installs new radome systems and replaces aging radome panels for ground-based and maritime antenna installations.

• New System Installation

  Assembles new radome systems in the field.

• Panel Replacement

  Replaces aging or damaged radome panels.

• Joint Sealing

  Seals bolted lap joints with flange gaskets and sealant.

• Interior-Access Assembly

  Supports captive-nut configurations for installation where exterior access is limited.

Internal testing and evaluation of radome materials including fabric styles, weave types, resin systems, core materials, and exterior coatings to validate structural and electrical properties; structural testing and material properties certification performed through accredited independent laboratories across the US.

Engineers relocatable ring wall systems that support sandwich radomes under high-wind design conditions.

• Ring Wall Systems

  Designs relocatable ring wall supports for sandwich radomes.

• Modular Steel Structures

  Uses modular steel structural shapes and composite filler panels.

• Transportable Support Assemblies

  Configures supports for disassembly, transport, and redeployment.