Idergy, PLLC

Comprehensive arc flash hazard analysis and safety compliance evaluations to mitigate risks and protect personnel.

• Electrical Equipment Surveying

  On-site data gathering of electrical ratings, protective device settings, and cable sizes to map the facility's power systems.

• Arc Flash Hazard Analysis

  System modeling and simulation of short circuits, time-current curves, and incident energy levels to determine safety boundaries.

• PPE Determination and Mitigation

  Analysis-driven selection of personal protective equipment (PPE) and recommendations to lower incident energy levels.

• Labeling and Reporting

  Generation of comprehensive technical safety reports and printing of compliant arc flash labels for facility equipment.

Detailed power system studies ensuring system reliability, safety, and compliance with industry standards.

• Load Flow Study

  Evaluations of voltage stability, voltage drop, power flow, and continuous equipment ratings to prevent overloading.

• Short Circuit Study

  Calculations of fault currents to verify interrupting ratings of protective devices, cables, and bus bars.

• Selective Coordination Study

  Coordination of circuit breakers, fuses, and relays to ensure localized, reliable fault clearing and minimize downtime.

• Thermal Ampacity Study

  Assessments of current-carrying capacities of electrical systems to prevent overheating and maintain safety limits.

• Photometric Lighting Study

  Analysis of light placement, illumination levels, and lumen output to optimize facility lighting design.

• Motor Starting Study

  Evaluation of high inrush currents, voltage dips, and motor torque profiles during start-up to ensure stable system performance.

• Grounding Study

  Assessment of grounding system effectiveness to mitigate step and touch potentials and enhance equipment safety.

Integrated engineering calculations, equipment specification, and detailed electrical drafting from conceptual design to construction-ready packages.

• Electrical Calculations and Specifications

  Precise calculations for equipment sizing, operating loads, voltage drops, and raceway fills under NFPA 70 standards, alongside data sheets and equipment procurement specifications.

• Design and Schematics Drafting

  Development of one-line diagrams, schematic drawings, and wiring interconnects to map electrical connectivity.

• Conduit and Layout Planning

  Detailed preparation of cable schedules, panel schedules, grounding plans, power plans, and lighting layouts.

• Hazardous Area Classification

  Design and analysis of hazardous area classification plans to ensure compliant installations in volatile environments.

• As-Built Documentation

  As-built drawing development and installation detail drafting for accurate records and troubleshooting.