AEED, Inc.

Multi-discipline engineering design and consulting integrating mechanical, electrical, plumbing, fire protection, and process engineering, with an emphasis on energy efficiency, code compliance, and green design.

• Mechanical Engineering

  HVAC and mechanical system design for clean rooms, commercial buildings, and industrial facilities, targeting occupant comfort and energy efficiency under applicable standards including USP 797/800 and ISO 14644-1.

  • Clean Room Design and Commissioning
  • HVAC Design (2D/3D)
  • Chilled Water Systems
  • Steam and Water Boiler Systems
  • Process Exhaust Systems
  • CFD Simulations of Air Movement and Dispersion Modeling
• Electrical Engineering

  Cost-effective electrical system design for commercial, industrial, healthcare, educational, and residential applications, with expertise in power systems analysis, emergency power, and arc flash compliance.

  • Power Distribution
  • Indoor and Outdoor Lighting Design
  • Lighting Control Systems
  • Standby and Emergency Power Systems
  • Fire Alarm Systems
  • Data and Communications
  • Renewable Energy Systems
  • Power Systems Analysis
  • Arc Flash Hazard Analysis and NFPA 70E Compliance
  • Selective Coordination Studies
• Plumbing Engineering

  Plumbing system design for commercial and industrial projects, including process sewer systems, sewage treatment systems, and water distribution.

  • Waste, Drain, and Vent Systems
  • Water Distribution
  • Lift Stations
  • Irrigation Systems
  • Process Sewer Systems
  • Sewage Treatment Systems
• Fire Protection Engineering

  Fire suppression, life safety, smoke control, and egress design in collaboration with architects and owners to meet life safety and property protection goals.

  • Fire Suppression Systems
  • Life Safety and Alarms
  • Smoke and Fire Barriers
  • Smoke Control
  • Egress Studies
• Process Engineering

  Chemical process development, piping, equipment, and controls design for the chemical industry, with specialized expertise in hydrogen systems as a green energy storage medium.

  • Chemical Process Development and Design
  • CFD Simulations and 3D Process Plant Design
  • 3D Laser Scanning for Plant As-Built Documentation
  • Piping Design and Stress Analysis
  • Process Equipment Design and Specification
  • Hydrogen Systems Design

Strategic energy management, audits, metering, and supply optimization programs designed to reduce operating costs and improve facility energy performance.

• Strategic Energy Management Programs

  Development and implementation of Strategic Energy Management Programs (SEMPs) for facilities ranging from corporate offices to wastewater treatment plants, with quarterly progress tracking.

• Energy Management Systems

  Design and implementation of tailored Energy Management Systems, integrating program analysis, energy audits, and operational procedure review to manage energy usage and improve profitability.

• Energy and Facility Audits

  Combined energy and facility audits identifying energy savings opportunities, equipment life spans, unscheduled maintenance risks, and preventive maintenance needs for a comprehensive facility risk report.

• Resource Management System Analysis and Metering

  Utility metering, sub-metering, and software monitoring package installation providing real-time and historical energy consumption data at the system and service-entrance levels.

• Resource Supply Management

  Gas, water, and electric utility rate optimization, incentive program analysis, load shedding, demand response, and energy efficiency credit programs to reduce supply costs.

Building Information Modeling using Autodesk Revit for 3D design coordination, clash detection, 3D laser scanning of existing structures, and as-built documentation for ongoing asset management.

Enhanced and basic commissioning for new and existing construction by three fully Certified Commissioning Authorities (CxA), verifying that all building systems are planned, installed, tested, and maintained per project requirements.