ADV-SOC, Inc.

Comprehensive environmental engineering, consulting, and remediation services supporting federal and state compliance programs.

• Phase I and Phase II Environmental Site Assessments

  ASTM-compliant environmental site assessments (Phase I ESA and Phase II ESA) for property transactions, base realignment, and environmental due diligence.

• Underground Storage Tank Assessment and Closure

  UST investigations, soil and groundwater sampling, corrective action planning, and regulatory closure under state and federal regulations.

• NEPA and CEQA Environmental Compliance

  Preparation of Environmental Assessments, Initial Studies, and Environmental Impact Statements for federal and state compliance.

• Stormwater Compliance

  Stormwater Pollution Prevention Plan (SWPPP) preparation, NPDES compliance, and Construction General Permit support.

• Wastewater Management

  Wastewater system assessment, effluent characterization, and industrial pretreatment compliance.

• Drinking Water Services

  Drinking water quality assessments, SDWA compliance, and watershed protection planning.

• Solid Waste Consulting

  Solid waste characterization, waste stream analysis, and RCRA compliance planning.

• Air Quality Compliance

  Air quality permitting, emissions inventories, Clean Air Act compliance, and air dispersion modeling.

• Environmental Remediation

  Soil and groundwater investigation, remedial design, and long-term monitoring under CERCLA and RCRA programs.

• Hazardous Materials Surveys

  Pre-demolition and pre-renovation surveys for asbestos, lead-based paint, PCBs, and other regulated substances.

• Biomonitoring

  Biological resource surveys and compliance monitoring.

• Cultural Resource Management

  Cultural resource records searches and resource management.

• Section 106 Compliance

  Section 106 consultations and cultural compliance support.

• SPCC Plan Preparation

  Preparation and PE certification of Spill Prevention, Control, and Countermeasure plans.

• Climate Resiliency and Vulnerability Assessments

  Climate vulnerability assessments, sea level rise analysis, and installation resilience planning.

• Energy Audits and Efficiency Studies

  ASHRAE Level I, II, and III energy audits, energy conservation measure identification, and life-cycle cost analysis.

Full-spectrum architecture and engineering services supporting facility and infrastructure programs.

• Architecture and Engineering

  Multi-discipline architect-engineer design, specification, and inspection support for federal facility projects.

• Civil Engineering

  Site development, grading, drainage, utilities, and infrastructure design for federal and public facilities.

• Structural Engineering

  Structural analysis, design, assessments, and seismic retrofit design for federal buildings and military facilities.

• Mechanical, Electrical and Plumbing Engineering

  MEP engineering including HVAC design, electrical distribution, and plumbing system design.

• Fire Protection Engineering

  Fire protection system design, hazard analysis, and code compliance.

• Geotechnical Investigation

  Geotechnical investigations and site evaluations.

Advanced surveying and mapping services supporting federal land management and infrastructure projects.

• Traditional Land Surveying

  Boundary surveys, topographic mapping, ALTA/NSPS land title surveys, and construction staking.

• Aerial Surveying and Photogrammetry

  Drone-based mapping, photogrammetry, and orthophoto production.

• LiDAR Mapping and Data Collection

  Airborne and terrestrial LiDAR data acquisition, point cloud processing, and digital elevation model production.

• Hydrographic Survey

  Hydrographic surveying and underwater mapping services.

Program management, construction oversight, and project controls for multi-discipline contracts.

• Federal Program Management

  Task order management, scope development, schedule control, and budget oversight for federal MATOC, SATOC, and IDIQ programs.

• Construction Management and Inspection

  Quality assurance inspection, resident engineering, submittal management, and contractor oversight.

• Project Controls and Scheduling

  Primavera P6 scheduling, earned value management, cost estimating, and project controls.